Glossy and Matt BOPP/opp Thermal Lamination Film
- Protect your product surface from pollution, damage & UV .corrode, and scratch during the process of produce, transport, store and installation
- Durable, recyclable, health & safe; Hot-temperature endurable, anti-aging.
- 6 color over print to improve your brand image by having your logo & contact details on Matt Opp Film ;
- Stable adhering capacity and Special easy-peel & remove, no adhesive residue after Matt Opp Film removal;
- We have the 9 whole production line (blow molding, printing, coating, cutting)
| Specification Of BOPP Thermal Lamination Film | |||||
| Item | Thickness(mic) | Ration/yield | Resistance | ||
| Type | Total | Tolerance | G/M2 | G/25MM | |
| Glossy | 17 | 17 | (+/-) 1.5mic | 15.68 | 560 |
| 20 | 20 | 18.43 | 560 | ||
| 25 | 25 | 22.65 | 580 | ||
| 27 | 27 | 24.95 | 620 | ||
| 30 | 30 | 27.67 | 630 | ||
| Matt | 17 | 17 | 14.81 | 580 | |
| 23 | 23 | 19.89 | 580 | ||
| 27 | 27 | 24.19 | 620 | ||
| 30 | 30 | 27.24 | 680 | ||
| Width | 200mm---1890mm (± 5mm) | ||||
| length | 2000M, 3000M, 4000M, 6000M,9000M,12000M(200M,300M for 1'' core) | ||||
| Paper core | (25.4mm)1'', (76mm) 3'', 6'' | ||||
| Connector | ≤ 2 | ||||
| corona treatment | Double sides | ||||
| surface tension | BOPP side ≥ 38dyne; EVA side ≥ 52dyne | ||||
| Application Manual | |||||
| Compound temperature | 80-110°C(185-230F) | ||||
| Compound pressure | 5-25mpa | ||||
| compound speed | 5-60m/min | ||||
| PROPERTIES | TEST METHOD | UNIT | TYPICAL DATAS | |||||
| MECHANICAL PROPERTIES | ||||||||
| Tensile strength | MD | ASTM D882 | N/ mm2 | ≥135 | ||||
| TD | ≥240 | |||||||
| Elongation at break | MD | ASTM D882 | % | ≤220 | ||||
| TD | ≤80 | |||||||
| Secant modulus | MD | ASTM D882 | N/ mm2 | ≥1800 | ||||
| PHYSICAL PROPERTIES | ||||||||
| Coefficient of friction | ASTM D1894 | ≤0.8 | ||||||
| Density | ASTM D792 | g/cm3 | 0.91 | |||||
| Gloss | ASTM D2457 | % | ≥90 | |||||
| Haze | ASTM D1003 | % | ≤2.8 | |||||
| THERMAL PROPERTIES | ||||||||
| Thermal shrinkage | MD | ASTM D1204 120ºC 5min | % | ≤4 | ||||
| TD | ≤2.0 | |||||||
| Thermal seal temperature range | ASTM F88 | ºC | 110-140 | |||||
| Thermal seal strength | ASTM F88r | N/15mm | 2.5 | |||||
| Surface tension | ASTM D2578 | Dyne | ≥38 | |||||
